Home Up Products Capabilities Services Search Contacts News Feedback

 Cardiff NSW - 1
Camperdown NSW Cardiff NSW - 1 Cardiff NSW Gloucester NSW Inverell NSW Kurri Kurri NSW Minchinbury NSW Rozelle NSW Tomago NSW Unanderra NSW Wyong NSW

 

Up

 

SYSTEM 2 - CARDIFF  NSW

Purpose designed & built Dust Collection System installed and commissioned May 2000 for automated furniture factory which turns over several hundred pieces of furniture per day. 

Location:  Cardiff NSW

Area Serviced:  Furniture Manufacturer

Volume:  21,000cmh

Fan Size:  37kw

No of Bags:   72 x 4200mm long

Discharge:  Rotary Feed Valve c/w Briquette Machine

Installed:  May 2000

Machines Serviced:  2 x Biesse Point to Points, Selco Beam Saw Dowling Machine, Grinder and 2 x ERMO Edgebanders.

 

View: Ducting to Ermo Edge banding machine.

Typical view showing duct sized to maintain equal velocity to all 3 machine spigots.

Other machines ducted to include 

  • Selco Beam Saw

  • 2 x Biesee Rover 321R

  • Chipper

  • Weeke boring machine

View showing ducting to central pre-separation section of dust collector.  This system was also supplied with demand cleaning of filter bags. 

By using both of these options the collector is so efficient that cleaning only occurs several times a day resulting in huge energy savings to our customer

Note: Dust Collector still sitting on less than -0.75kpa (3" w/gauge) and original bags still in use after 5 years)

View showing cleaning system and plenum area.  
Note: Fall on lid to reduce premature corrosion.

 

Send mail to relle@austedan.com.au with questions or comments about this web site.
Copyright © 2009 AUSTEDAN FABRICATIONS PTY LTD
Last modified: 19-Nov-2009